User’s Manual
MC RoaR the GiGanotosauRus TM
© 2013 VTech
Printed in China
US
91-009633-007
INTRODUCTION
Yo! I’m MC Roar, and I like to rhyme. Come kick it with me, and we’ll
have a good time! I’ve got rows of sharp teeth and mad skills on the
mic! I’m big, strong, and powerful – what’s not to like?
Now watch me transform, and you’ll see the flip side. ‘Cause this
dino can change into a super cool ride. I’ve got a fast engine, and it
revs down the road – as I light up the night with my wheels of gold.
Sound Button
On/Off Switch
Talk Button
LCD Screen
Style Button
2
INCLUDED IN THIS PACKAGE
•
One VTech® SWITCH & GO DINOS®: MC Roar the GiganotosaurusTM
•
One user’s manual
WARNING:
All packing materials, such as tape, plastic sheets, packaging
locks and tags are not part of this toy, and should be discarded
for your child’s safety.
ATTENTION:
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches et étiquettes. Ils ne font pas partie du jouet.
NOTE:
Please keep the user’s manual as it contains important information.
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the
bottom of the unit. Use a screwdriver
to loosen the screw.
3. Install 2 new “AAA” (LR03/AM-4)
batteries following the diagram inside
the battery box. (The use of new,
alkaline batteries is recommended
for maximum performance.)
4. Replace the battery cover and tighten
the screw to secure.
3
BATTERY NOTICE
•
•
•
Use new alkaline batteries for maximum performance.
Use only batteries of the same or equivalent type as recommended.
Do not mix different types of batteries: alkaline, standard (carbon-
zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
•
•
•
•
•
•
•
•
Do not use damaged batteries.
Insert batteries with the correct polarity.
Do not short-circuit the battery terminals.
Remove exhausted batteries from the toy.
Remove batteries during long periods of non-use.
Do not dispose of batteries in fire.
Do not charge non-rechargeable batteries.
Remove rechargeable batteries from the toy before charging (if
removable).
•
Rechargeable batteries are only to be charged under adult
supervision.
PRODUCT FEATURES
1. TURNING THE UNIT ON
Slide the ON/OFF Switch to ON to turn the unit ON.
2. STYLE BUTTON
Press the Style Button to choose a driver
or change the dino eyes.
4
3. TALk BUTTON
Press the Talk Button to hear the dino or
driver talk.
4. SOUND BUTTON
Press the Sound Button to hear cool sound
effects.
5. VOLUME BUTTON
Press the Volume Button to adjust the
volume.
6. TURNING THE UNIT OFF/ AUTOMATIC SHUT-OFF
Slide the ON/OFF Switch to OFF to turn the unit OFF. To preserve
battery life, the unit will automatically power-off after several minutes
without input.
5
HOW TO SWITCH THE DINO TO A CAR
1. Dinosaur shape.
2. Push the jaw up. Then push
the head down.
4. Flip the legs up.
6. Car shape.
3. Turn the feet down.
5. Turn the tail up.
Note:
6
To change the car back into a dino, reverse the order of the steps above.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit is not in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to
moisture or water.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions, please follow
these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with a new set of batteries.
If the problem persists, please call our Consumer Services Department
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a
service representative will be happy to help you.
NOTE:
This equipment generates and uses radio frequency energy and if
not installed and used properly, that is, in strict accordance with the
manufacturer’s instructions, it may cause interference to radio and
television reception. It has been type tested and found to comply
within the limits for a Class B computing device in accordance with the
specifications in Sub-part J of Part 15 FCC rules, which are designed
to provide reasonable protection against such interference in a
residential installation. However, there is no guarantee that interference
7
will not occur in a particular installation. If this equipment does cause
interference with radio or television reception, which can be determined
by turning the equipment on and off, the user is encouraged to try to
correct the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected
•
Consult the dealer or an experienced radio/TV technician for help
Caution: changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC
RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH
CANADIAN ICES-003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST
CONFORME À LA NORME NMB-003 DU CANADA.
8
|